Bahreyni, Behraad and Najafi, Farshid and Shafai, Cyrus (2006) Piezoresistive sensing with twin-beam structures in standard MEMS foundry processes. Sensors and Actuators A: Physical, 127 (2). 325 - 331.
Full text is not hosted in this archive but may be available via the Official URL, or by requesting a copy from the corresponding author.
Official URL: http://www.sciencedirect.com/science/article/B6THG...
A technique for fabrication of piezoresistive sensors in standard MEMS processes is introduced. The basic twin-beam structure comprises of a pair of beams from different structural layers and the structure is designed such that when one beam is under tension, the other one is under compression. If at least one of the beams is made of a piezoresistive material, it is possible to measure the change in the resistance of beams as a result of the applied stress by properly routing an electrical current through the structure. The proposed method does not require electrical isolation of piezoresistors from structural layers, and as confirmed by experiments, can be practically used for small deflections. Sample structures were fabricated in the MUMPs process and were employed to prove the validity of the design principle. Using the Maxwell–Mohr method, an analytic model is developed for the proposed structure and is verified by finite element simulations. Using modeling and experimental results, the piezoresistive coefficient of the top polysilicon layer in MUMPs process was calculated to be −10.65×10−11 Pa−1. Having the proper structure, its model, and the piezoresistive coefficient of the material, it is now possible to design and optimize a wide variety of piezoresistive sensors such as accelerometers and magnetic field sensors in low-cost standard MEMS processes.
|Additional Information:||MEMS 2005 Special Issue - Special Issue of the Micromechanics Section of Sensors and Actuators (SAMM), based on contributions revised from the technical digest of the IEEE 18th International Conference on Micro Electro Mechanical Systems (MEMS-2005).|
|Uncontrolled Keywords:||Piezoresistivitiy; MEMS; Sensor; Modeling; MUMPs|
|Subjects:||Analytical Science > Nanotechnology for sensing and actuating|
|Deposited On:||30 Jun 2009 15:00|
|Last Modified:||30 Jun 2009 15:00|
Repository Staff Only: item control page