Li, Bo and Chen, Quanfang (2006) Solid micromechanical valves fabricated with in situ UV-LIGA assembled nickel. Sensors and Actuators A: Physical, 126 (1). 187 - 193.
Full text is not hosted in this archive but may be available via the Official URL, or by requesting a copy from the corresponding author.
Official URL: http://www.sciencedirect.com/science/article/B6THG...
In situ UV-LIGA assembled robust microcheck valves with large flow rates (>10 ml/s, displacement related), high-pressure support ability (>10 MPa) and high operational frequencies (>10 kHz) made of nano-structured nickel were presented in this paper. The microvalve consists of an array of 80 single microvalves to achieve the required flow rates. A novel in situ UV-LIGA process was developed for the fabrication. Test results show that the forward flow rate is about 19 ml/s under pressure of 90 psi. The backward flow rate is negligible. The loading/unloading test results show that the flow rates were repeated very well over a large range of tested pressure differences. The reliability of the valve is ensured by the low stress valve design and the robust nano-structured nickel material fabricated.
|Uncontrolled Keywords:||In situ UV-LIGA assemble; Robust microvalve; Solid nickel|
|Subjects:||Analytical Science > Nanotechnology for sensing and actuating|
|Deposited On:||30 Jun 2009 16:33|
|Last Modified:||30 Jun 2009 16:33|
Repository Staff Only: item control page