Barreca, D and Blau, Werner J. and Croke, G. M. and Deeney, F. A. and Dillon, F. C. and Holmes, J. D. and Kufazvinei, C and Morris, M. A. and Spalding, T. R. and Tondello, E (2007) Iron oxide nanoparticle impregnated mesoporous silicas as platforms for the growth of carbon nanotubes. MICROPOROUS AND MESOPOROUS MATERIALS, 103 (1-3). pp. 142-149.
Full text is not hosted in this archive but may be available via the Official URL, or by requesting a copy from the corresponding author.
Official URL: http://dx.doi.org/10.1016/j.micromeso.2007.01.041
Iron oxide nanoparticles have been deposited on the exterior of and inside the pores of hexagonal mesoporous silica by a direct synthesis technique with iron phthalocyanine as precursor. Iron loadings were between 0.4 wt.% - 3.2 wt.%. XPS and Mossbauer spectroscopic studies showed that the initial form of the iron oxide nanoparticles was [Fe2O3]. Samples of these iron-loaded materials were stirred in nitric acid to remove the iron oxide existing on the exterior surface of the silica. No significant loss in mesophase ordering was seen in the TEM, PXRD or nitrogen physisorption analysis of the acid washed samples. Both as-prepared and acid-washed silicas were used to grow multi-walled carbon nanotubes (MWCNTs) from acetylene feedstock in a catalytic chemical vapour deposition reactor at 800 degrees C. In both systems the density of the carbon nanotubes (CNTs) was found to increase with increasing metal loadings. Whereas the as-prepared samples produced CNTs with a range of diameters from 10 nm to 90 run, the acid treated samples showed CNTs with much more uniform diameters between 5 nm - 15 nm. Raman spectroscopy of the products showed that the carbon nanotubes were highly graphitised and of good quality. (C) 2007 Elsevier Inc. All rights reserved.
|Uncontrolled Keywords:||mesoporous silica; carbon nanotubes; catalytic chemical vapour deposition; mossbauer spectroscopy; transmission electron microscopy|
|Subjects:||Analytical Science > Microscopy and probe methods|
Material Science > Nanofabrication processes and tools
Physical Science > Nano objects
|Deposited By:||Farnush Anwar|
|Deposited On:||16 Jan 2009 16:03|
|Last Modified:||12 Feb 2009 15:00|
Repository Staff Only: item control page