Nano Archive

Effect of ZnO nano-particulate modification on properties of PZT-BLT ceramics

Promsawat, Methee and Watcharapasorn, Anucha and Jiansirisomboon, Sukanda (2011) Effect of ZnO nano-particulate modification on properties of PZT-BLT ceramics. sciencedirect, 38 (1). pp. 215-218. ISSN 0272-8842

Full text is not hosted in this archive but may be available via the Official URL, or by requesting a copy from the corresponding author.

Official URL: http://pdn.sciencedirect.com/science?_ob=MiamiImag...

Abstract

This research was conducted to study the effect of ZnO nano-particulate modification on properties of Pb(Zr0.52Ti0.48)O-3 (PZT)-(Bi3.25La0.75)Ti3O12 (BLT) ceramics prepared by a mixed-oxide solid-state sintering method. ZnO nano-particulate was added into PZT-BLT ceramics to obtain PZT-BLT/xZnO (x = 0, 0.1, 0.5 and 1.0 wt%). The PZT-BLT/xZnO ceramics were investigated in terms of phase, microstructure, physical, electrical, and mechanical properties. Tetragonality of PZT BLT crystal structure tended to increase with increasing ZnO content. ZnO addition obviously increased the density of PZT BLT ceramics while the grain size slightly decreased. Intergranular fracture mode was observed for pure PZT BLT ceramic while the samples contained ZnO nano-particles showed a mixed-mode inter-/trans-granular fracture. Addition of ZnO also affected hardness and fracture toughness values. Addition of ZnO nano-particulate into PZT BLT ceramics was found to improve room temperature dielectric constant but did not have a significant effect on ferroelectric properties. These observed results were expected to be caused by the behaviors similar to a donor-doped system. (C) 2011 Elsevier Ltd and Techna Group S.r.l. All rights reserved.

Item Type:Article
Subjects:Material Science > Nanostructured materials
ID Code:11843
Deposited By:CSMNT
Deposited On:21 May 2012 16:47
Last Modified:24 May 2012 10:04

Repository Staff Only: item control page