Nano Archive

Nano/micro particle beam for ceramic deposition and mechanical etching

Chun, Doo-Man and Kim, Min-Saeng and Yeo, Jun-Cheol and Kim, Min-Hyeng and Lee, Caroline Sunyong and Ahn, Sung-Hoon (2010) Nano/micro particle beam for ceramic deposition and mechanical etching. Physica Scripta, 2010 (T139). 014047.

Full text is not hosted in this archive but may be available via the Official URL, or by requesting a copy from the corresponding author.

Official URL: http://stacks.iop.org/1402-4896/2010/i=T139/a=0140...

Abstract

Nano/micro particle beam (NPB) is a newly developed ceramic deposition and mechanical etching process. Additive (deposition) and subtractive (mechanical etching) processes can be realized in one manufacturing process using ceramic nano/micro particles. Nano- or micro-sized powders are sprayed through the supersonic nozzle at room temperature and low vacuum conditions. According to the process conditions, the ceramic powder can be deposited on metal substrates without thermal damage, and mechanical etching can be conducted in the same process with a simple change of process conditions and powders. In the present work, ceramic aluminum oxide (Al 2 O 3 ) thin films were deposited on metal substrates. In addition, the glass substrate was etched using a mask to make small channels. Deposited and mechanically etched surface morphology, coating thickness and channel depth were investigated. The test results showed that the NPB provides a feasible additive and subtractive process using ceramic powders.

Item Type:Article
ID Code:11234
Deposited By:Prof. Alexey Ivanov
Deposited On:01 Nov 2011 23:29
Last Modified:02 Nov 2011 00:47

Repository Staff Only: item control page