Nano Archive

Erratum to: Micro-fabricated perforated polymer devices for long-term drug delivery

Wu, Zhuo-Jie and Luo, Zhiquan and Rastogi, Ashish and Stavchansky, Salomon and Bowman, Phillip D. and Ho, Paul S. (2011) Erratum to: Micro-fabricated perforated polymer devices for long-term drug delivery. BIOMEDICAL MICRODEVICES, 13 (3). p. 597. ISSN 1387-2176 (Print) 1572-8781 (Online)

Full text is not hosted in this archive but may be available via the Official URL, or by requesting a copy from the corresponding author.

Official URL: http://www.springerlink.com/content/w8154864mt6654...

Abstract

Fabrication techniques have been developed to produce a perforated polymer microtube as a drug delivery device. The technique consists of first forming a silicon platform with trenches and alignment marks to hold the tubes for subsequent processing. Photolithography and reactive ion etching with an inductively coupled plasma source were used to fabricate micro holes on the surface of polyimide tubes. Several materials have been used to form the etching mask, including titanium film deposited by e-beam evaporation and SiO2 and SiNx films deposited by high-density plasma chemical vapor deposition (HDPCVD). Three equidistant holes of 20 μm in diameter were fabricated on polyimide tubes (I.D. = 125 μm). The perforated tubes were loaded with ethinyl estradiol and tested for drug release in phosphate buffered saline (pH = 7.1) at 37°C. Zero order release was observed over a period of 30 days with a potential to be extended to 4 years.

Item Type:Article
Uncontrolled Keywords:Drug delivery device – Microfabrication – Polymer tube – Polyimide
Subjects:Biomedical Science > Nanobiotechnology
Biomedical Science > Nanomedicine
ID Code:10700
Deposited By:SPI
Deposited On:08 Jun 2011 11:12
Last Modified:08 Jun 2011 11:12

Repository Staff Only: item control page